Refrigerated Compressed Air ,Get a refrigerated air dryer to help easily provide continuous dry air to your compressed air supply line. Refrigerated compressed air dryers work by cooling the air that enters the compressor, helping the water vapor in the air to condensate and drain out. Providing dry air can help protect your pneumatic piping, tools, and equipment.
1. Why choose Air Compressor Dryer (?
Get a refrigerated air dryer to help easily provide continuous dry air to your compressed air supply line. Refrigerated compressed air dryers work by cooling the air that enters the compressor, helping the water vapor in the air to condensate and drain out. Providing dry air can help protect your pneumatic piping, tools, and equipment.
2. Sollant Refrigerated Compressed Air Dryer:
Refrigerated Compressed Air Dryers help to dry air by passing it through a refrigerated heat exchanger. By cooling the air that enters the compressor, the dryers allow water vapor to condensate and drain out. Providing dry air can help protect your pneumatic piping, tools, and equipment. Choose from ISO Class 4, 5, or 6.
3. Advantages of Sollant SA and LG type Air Dryer:
(1). The specially designed air outlet is installed with a heat energy 、recovery device to ensure that the outlet pipe does not condense, reduce the temperature of the refrigerant, enhance the freezing effect, and save energy.
(2). Using a special design, the pressure difference is small, saving power consumption.
(3). The use of high-quality thickened copper tubes prevents the copper tubes from being corroded to cause leakage of the machine’s refrigeration system and has a longer service life.
(4). Use high-performance heat exchangers.
The large-capacity design ensures the stable operation of the machine under harsh working conditions.
(5). The cylinder body adopts anti-corrosion treatment to prevent rust inside the machine.
(6). Use high-quality parts.
High-performance refrigeration compressors such as German Copeland, Danfoss, Bitzer, etc. are used. Such compressors have low energy consumption, high efficiency and high stability to ensure the best efficiency for a long time. refrigeration components promise to use the world’s top brands such as Danfoss, American Slovakia, American Emerson, and other original accessories, to eliminate low-cost products and sub-good phenomenon, to provide users with the highest quality product.
(7). Performance improvement
Efficient air and water separator and multiple drainage design, more timely and thorough drainage, to avoid dew-point quality problems caused by water residue.
The whole series is equipped with high and low voltage protection, an anti-freeze switch, and current overheat protection to ensure that the machine failure does not spread and reduce the maintenance cost within the service life of the whole machine.
8). More options and customized configurations
*Special machine (the inlet temperature is higher than 80℃, the pressure is higher than 1.0 MPa, environmentally friendly refrigerant, special gas, etc.)
*Dew point temperature display and signal transmission function.
*Remote start and stop, remote rotation, alarm signal terminal contacts.
*Control is upgraded to adopt PLC control, operate and display the required parameters by touch screen or text.
*On the basis of PLC control, increase the remote communication function.
4. Technical Parameters:
*SA type Air Dryer Specification:
*LG type Air Dryer Specification:
5. Sollant Plate heat exchange type air dryer:
It is an efficient plate heat exchanger made of a certain corrugated stainless steel sheet. Unlike the conventional stainless steel plate, the pre-cooler evaporator and the gas-water separator are combined into one. No external nozzles and splitters are required. The structure is compacted and with a small footprint.
6. Feature of Sollant Plate heat exchange type air dryer:
(1). It adopts the advanced stainless steel fin structure, which integrates pre-cooler, evaporator, and gas-water separator as a whole, with small volume and no secondary pollution to compressed air.
(2). The heat exchanger has a compact structure and a high heat transfer coefficient; The temperature difference between the inlet and outlet of the precooler at 5-8℃ is much better than that of the traditional heat exchanger, which not only ensures extremely low relative humidity at the outlet but also effectively reduces the load of the evaporator, thus reducing the energy consumption of the whole machine.
(3). Small size, easy installation, modular combination to improve production efficiency.
(4). Adopt internationally famous brand refrigeration compressor, the performance is stable and reliable.Control: dew point display, simple
(5). operation and remote control.
7. Lga Type Air Dryer Specification:
Shanghai Sollant Energy Saving Technology Co., Ltd. is located in Jiading disrtrict Shanghai City which is China’s logistics
capital with great transportation convenience. Sollant is a comprehensive screw air compressor manufacturer that engaged in R & D, design, production and sales. It has a plant of 10,000 square meters, including a large production workshop, a comprehensive first-class exhibition hall and a testing laboratory.
